seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing throttle valve moduleJ338 > < Fuel rail: Assembly overview (Version II)

Leon Mk2

Fuel rail: removing and fitting .
Fuel rail: removing and fitting .
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Now remove the intake manifold → Chapter.
–  Remove the activated carbon filter tubing.
   
–  To do so, release the hose clamp -1-.
–  Loosen the two bolts -arrows- of fuel rail.
  A24-10115
–  Disconnect the hose coupling -1- from the intake manifold, and loosen the two bolts -arrows-.
–  Loosen the coupling nuts of the two fuel pipes -2 and 3-.
–  Carefully lever out the rod on the intake manifold flap motor -V157--4-.
–  Loosen the intake manifold flap motor -V157--5-.
  A24-10116
–  Remove fuel rail from intake manifold.
Installing
–  Installation is in the reverse sequence of removal.
Tightening torque (Version I) → Chapter.
Tightening torque (Version II) → Chapter.
  A24-10117

Removing and installing throttle valve moduleJ338 > < Fuel rail: Assembly overview (Version II)