seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine and DSG gearbox: Separate > < Engine: dismounting

Leon Mk2

Separating engine from gearbox
Separating engine from gearbox
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
   
Special tools and workshop equipment required
t  Hook -10 - 222 A /2-
t  Counterhold -T40013-, see equivalent → Anchor
t  Workshop crane -VAS 6100-, see equivalent → Anchor

Operation process
   
–  Unscrew bolt -1- with gearbox fitted.
–  Pull the cover plate -2- off upwards.
  Note
This is shown in the figure with the gearbox removed.
  A34-0234
–  Unscrew the bolts -1 … 8- on the flange between the engine and the gearbox.
–  Take out starter motor.
  Note
The gearbox is shown in illustration with engine removed.
–  Attach lifting tackle -T40013- to gearbox and close lock.
  A37-0214
–  Attach workshop crane -VAS 6100- with hooks -10 - 222 A /2- to lifting tackle.
–  Carefully separate the gearbox from the engine, using the workshop crane.
  A10-1681

Engine and DSG gearbox: Separate > < Engine: dismounting