seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Removing and installing radiator fanV7 and radiator fan?2V177

Leon Mk2

Radiator: Removing and installing
Radiator: Removing and installing
Removing → Anchor.
Installing → Anchor.
   
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  Refractometer -T10007-, see equivalent → Anchor
t  Adapter -V.A.G 1274/8-, see equivalent → Anchor
t  Charger -VAS 6096-, see equivalent → Anchor
t  Tray -VAS 6208-, see equivalent → Anchor
t  Pliers for spring-type clips -VAS 6499- → Anchor see equivalency

Removing
–  Drain coolant → Chapter.
–  Remove radiator cowl → Chapter.
   
–  Remove the supercharger air hoses -arrows-.
  N10-10090
–  Remove the coolant hose -arrow- at the top of the cooler.
  A19-10406
–  Remove bolts -1 and 2- and take out radiator downwards.
Installing
Installation is carried out in the reverse order; noting the following in the process:
–  Do not re-use coolant if fitting a new radiator.
–  Install radiator cowl → Chapter.
–  Install air pipes/hoses with plug-in connectors → Chapter.
–  Fill up coolant → Chapter.
Tightening torques:
  A19-10465
Qty.Nm
Radiator bracket to lock carrier plate5
Condenser to radiator5
Cowling to radiator5

   

Fuel supply, gas operation > < Removing and installing radiator fanV7 and radiator fan?2V177