–
| Screw dial gauge adapter -T10170/A- into spark plug hole to stop. |
–
| Insert gauge -VAS 6079- with extension -T10170A/1- as far as the stop and secure using nut -arrow-. |
–
| Rotate the crankshaft slowly to the maximum deflection of the pin in the direction of engine rotation. Once the maximum deflection of the pin has been reached (reverse point of the pin), the piston is located in the »TDC position«. |
Note When the crankshaft rotates beyond the »TDC«, the crankshaft must be rotated by approx. 45° against the direction of the engine again. Then turn the crankshaft in the direction of rotation of the engine until it reaches the »TDC position«. |
|
|
|