SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing oil pressure switch for reduced oil pressureF378 >
< Removing and installing engine oil cooler
Leon Mk2
Power unit
4 cylinder Injected engine (engine 1.8 l and 2.0 l, timing chain)
Engine lubrication
Oil filter and oil cooler (engine codes CCZB - CDAA)
Removing and installing oil pressure switchF22
Removing and installing oil pressure switchF22
Removing and installing oil pressure switch -F22-
Removal:
–
Remove the purging line
-1-
, disengage the activated carbon vessel
-A-
and remove upwards
-B-
. Move the activated carbon vessel to one side.
Note
Place a cloth underneath bracket for ancillaries to catch any escaping oil.
–
Disconnect electrical connector
-4-
on oil pressure switch -F22-.
–
Remove oil pressure switch -F22-
-3-
.
Installation
l
Tightening torque
→ Chapter
Reassembly is carried out in the reverse order; note the following:
Note
t
Renew seal.
t
Fit the new oil pressure switch -F22- into the connection immediately to avoid the loss of oil.
–
Check oil level
→ Fig.
.
Power unit
4 cylinder Injected engine (engine 1.8 l and 2.0 l, timing chain)
Engine lubrication
Oil filter and oil cooler (engine codes CCZB - CDAA)
Removing and installing oil pressure switchF22
Removing and installing oil pressure switch for reduced oil pressureF378 >
< Removing and installing engine oil cooler