Leon Mk2
| Part I (engine codes BYT, BZB, CDAA) |
| 1 - | Turbocharger |
| q | Can only be replaced completely along with the exhaust manifold and the pressure capsule |
| q | Removing and installing → Chapter |
| 2 - | To activated charcoal filter. |
| 3 - | Turbocharger pressure capsule |
| q | Checking → Chapter |
| q | Removing and installing → Chapter |
| q | Adjusting → Chapter |
| 4 - | Seal |
| q | Replace |
| 5 - | Thrust piece |
| 6 - | Banjo bolt |
| q | 8 Nm |
| 7 - | Flexible hose |
| 8 - | Flexible hose |
| 9 - | Bolt. |
| q | 3 Nm |
| 10 - | Charge pressure control solenoid valve -N75- |
| 11 - | Flexible hose |
| 12 - | Seal |
| q | Replace |
| 13 - | Thrust piece |
| 14 - | Securing clip |
| 15 - | Bolt. |
| q | 9 Nm |
| 16 - | Bolt. |
| q | 7 Nm |
| 17 - | Turbocharger air recirculation valve -N249- |
| q | Note installation position → Fig. |
| 18 - | Seal |
| q | Replace |
|
|
