seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Air filter: Removing and installing > < Cover with oil separator: Removing and installing (engine code BYT)
Assembly overview - air filter
   
Assembly overview - air filter
1 - Spring-type hose clip
2 - Air hose
q   To turbocharger
q   Ensure that there is no dirt or leaves in the air hose.
3 - Air mass meter -G70-
q   2 Nm
q   Removing and installing → Chapter
4 - Bolts
q   For the upper element of the air filter housing
q   2 Nm
5 - Bolts
q   For the upper element of the air filter housing
q   2 Nm
6 - Air filter housing (upper section)
q   Clean the bottom part of the air filter from salt deposits, dirt and leaves.
7 - Filter element
q   Always use a genuine spare part air filter element
q   Removing and installing → Chapter
q   Heed replacement intervals → Booklet101
8 - Bolt.
q   For the lower element of the air filter housing
q   8 Nm
9 - Snow grid
q   Not fitted in all vehicles
10 - Air filter housing (lower section)
q   Clean the bottom part of the air filter housing from salt deposits, dirt and leaves.
11 - Connection element for the drain hose
q   Clean connection
12 - Water drain hose
q   Drain hose
13 - Oscillating valve
14 - Intake air duct
q   To the lock carrier plate
q   Clean away any dirt and remove leaves from the intake air conduit

   

Air filter: Removing and installing > < Cover with oil separator: Removing and installing (engine code BYT)