SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder Injection engine (1.2 l direct injection engine, turbocharger) | Engine assy,cylinder block,crankcase | Engine: Removing and installing

Assembly mountings

Tightening torques

Note

The fastening bolts of the engine assembly brackets are expandable bolts and must be replaced.

Engine assembly mountings

A ¹⁾ = 20 Nm + 90° further

B ¹⁾ = 40 Nm + 90° further

C ¹⁾ = 60 Nm + 90° further

¹⁾ Renew.

Gearbox assembly mounting

A ¹⁾ = 40 Nm + 90° further

B ¹⁾ = 60 Nm + 90° further

¹⁾ Renew.

Pendulum support

Turn strength class A ¹⁾ 8.8 = 40 Nm + 90° further

Turn strength class A ¹⁾ 10.9 = 50 Nm + 90° further

B ¹⁾ = 100 Nm + 90° further

¹⁾ Renew.

SEAT Workshop Service and Repair Manuals