Cooling system components: removing and fitting |
Note t
| When the engine is hot the cooling system is under pressure. If necessary release pressure before commencing repair work. |
t
| Hose connections are secured with spring-type clips. When repairing, only use spring-type clips. |
t
| To fit spring type clips use pliers -T20029-. |
t
| The flexible tubes for the liquid coolant should remain under no tension during fitting and should not come into contact with other components. |
Carry out leak test of cooling system with cooling system tester -SAT 1274- and adapter -V.A.G 1274/3-. |
Cooling liquid: evacuation and charging → Chapter. |
Notes on coolant mixture ratios → Chapter; Cooling liquid: emptying and filling. |
|
|
|