Leon Mk2
Cooling system, bodywork side: disassembly and assembly |
1 - | Attachment |
2 - | 10 Nm |
3 - | Radiator |
q | Removing and fitting → Chapter |
q | After replacing, refill all coolant |
4 - | Lock carrier plate |
5 - | Trapezoidal drive belt |
q | Only when optional equipment is fitted |
6 - | Guide ring |
q | Note the fitting position. |
q | Fitted to the ducting by clips → Item |
7 - | Radiator fan |
q | Removing and fitting → Chapter |
8 - | Upper coolant hose |
q | To the connection nozzle → Item |
9 - | Lower coolant hose |
q | To the liquid coolant pump → Item |
10 - | Additional fan |
q | Only when optional equipment is fitted |
q | Removing and fitting → Chapter |
11 - | Ventilator ducting |
12 - | Connector |
13 - | Cover |
14 - | Expansion tank |
q | Carry out leak test of cooling system with cooling system tester -SAT 1274- and adapter -V.A.G 1274/3-. |
15 - | To rigid liquid coolant tube |
q | → Item |
16 - | From the throttle valve control |
q | Except for identification letters 1F |
17 - | To the connection nozzle |
q | → Item |
18 - | Cover |
q | Verify using the tester -SAT 1274- and the adapter -V.A.G 1274/4- |
q | Test pressure: 1.3…1.5 bar |
19 - | Thermal switch -F18-, 35 Nm |
q | For electric fan |
q | Switching temperatures: |
1.a speed |
connects: 92…97 °C |
disconnects: 84…91 °C |
2.a speed |
connects: 99…105 °C |
disconnects: 91…98 °C |
20 - | O-ring |
q | For the lower support of the radiator |
21 - | Air duct, front |