Note | t
| When installing an exchange cylinder head, oil all contact surfaces between the support elements, roller rocker arms and the cams before installing the camshaft housing. |
| t
| The plastic protectors fitted to protect the open valves must only be removed immediately before fitting the cylinder head. |
| t
| When fitting a new cylinder head or cylinder head gasket, drain off all the old coolant and re-fill with new coolant. |
| t
| Oil all bearing and running surfaces before assembly. |
| t
| Dismantling and assembling intake manifold → Chapter. |
| Removing and installing timing chain and drive chain for oil pump → Chapter |
| Camshaft housing:removing and fitting → Chapter |
| Removing and installing cylinder head → Chapter. |
|
|
|
