| Repairs to the fuel supply system |
Note | t
| Hose connections are secured with either spring-type or clamp-type clips. |
| t
| Always replace clamp-type clips with spring-type clips. |
| t
| The fuel hoses in the engine compartment must only be attached with plastic clamps. The use of clamp or screw-type clips is not permissible. |
| t
| Hose clip pliers -VAS 6340- are recommended for fitting spring-type hose clips. |
| Observe safety precautions when working on fuel supply system → Chapter. |
| Please remember the fuel cut-off system in the event of accident → Chapter. |
| Removing and installing fuel gauge sender -G- → Chapter. |
| Removing and installing suction jet pump → Chapter. |
|
|
|
