seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft > < E - Checking sender wheel installation position on crankshaft

Leon Mk2

F - Re-pressing sender wheel
F - Re-pressing sender wheel
   
–  Secure the fitting device -T10134- using the Allen bolts -A- to the crankshaft flange.
–  Tighten the two hexagon socket head bolts hand-tight.
–  Slide fitting device -T10134- onto the sealing flange by hand.
  N13-10044
–  Screw the hexagon nut -E- onto threaded spindle by hand until it lies against the assembly housing -C-.
  N13-10084
–  Tighten the hexagon nut of the fitting device -T10134- using the torque wrench -V.A.G 1331- and the 24 mm insert terminal -V.A.G 1332/11- to 40 Nm.
–  Check the fitting position of the sender wheel on the crankshaft once more → Chapter.
If dimension a is still too small:
–  Tighten hexagon nut of assembly tool -T10134- to 45 Nm.
–  Check the fitting position of the sender wheel on the crankshaft once more → Chapter.
  N13-10085

Crankshaft > < E - Checking sender wheel installation position on crankshaft