seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing inlet valve > < Assembly overview - gas tank (Autogas)

Leon Mk2

Removing and installing pressure relief valve
Removing and installing pressure relief valve
Removal:
Carry out the following work:
   
–  Release latch -1- and remove protective cover -2-.
–  Emptying the Autogas tank → Chapter
  WARNING
There is a danger of injury due to escaping gas.
The system is under pressure.
Wear suitable protective measures, such as protective gloves and protective goggles.
Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.
  N01-10928
–  Unscrew pressure relief valve -1-.
Installation
–  Apply a coating of sealing paste -JNV 133 155- to thread of new pressure relief valve.
Tightening torque: 90 Nm
  N20-10719

Removing and installing inlet valve > < Assembly overview - gas tank (Autogas)