Leon Mk2
Intake manifold - exploded view |
1 - | Intake manifold |
q | removing and installing → Chapter |
2 - | Seal |
q | Replace |
3 - | 7 Nm |
4 - | Throttle valve control mechanism -J338- |
q | Clean → Chapter. |
q | If renewed, erase learnt values and adapt engine control unit to throttle valve module → Vehicle diagnostic, testing and information system VAS 5051„Guided function“ |
5 - | 20 Nm |
6 - | Flexible hose |
q | To brake servo |
7 - | O ring |
q | Replace |
8 - | Coolant hose |
q | For crankcase breather preheater |
9 - | Spring-type hose clip |
q | Remove and install using hose clip pliers -VAS 6340- or spring-type clip pliers -VAS 5024A- |
10 - | Crankcase breather preheater |
q | Removal and installation involves removing the intake manifold → Chapter |
11 - | 3 Nm |
12 - | Flexible hose |
q | To crankcase breather vacuum valve |
13 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
q | Clipped onto intake manifold. |