seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil pressure and oil pressure switchF1: Check > < Oil sump: Removing and installing

Leon Mk2

Oil pump: Removing and installing
Oil pump: Removing and installing
t  Removing → Anchor
t  Fitting → Anchor.
Removing
–  Remove oil sump and baffle plate → Chapter.
   
–  Remove bolt -2-.
–  Take chain sprocket off oil pump shaft.
–  Unscrew bolts -1- and -3- and take oil pump off.
Installing
Installation is carried out in the reverse order of removal while noting the following:
–  Set the guide pins → Item on the upper part of the oil pump.
  Note
The oil pump shaft and the chain sprocket can only be fitted in one position.
–  Install sump → Chapter.
  A17-0209

Oil pressure and oil pressure switchF1: Check > < Oil sump: Removing and installing