seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Bearing shells: Installation position (engine code BGU) > < Pistons and conrods - general over view of components

Leon Mk2

New conrod: Separate
New conrod: Separate
It is possible that the fracture point is not completely fractured in new conrods. If the cover of the conrod bearing can not be removed by hand, proceed as follows:
–  Mark the conrod correspondence to the cylinder → Item.
   
–  Secure the conrod, as shown in the figure, on a vice with protecting aluminium clamps.
  Note
t  Secure the conrod slowly so that it does not break.
t  The conrod is attached below the cutting line.
–  Unscrew 5 turns the two shock absorber bolts -arrows-.
  N13-10285
–  Loosen the head of the bearing of the conrod -arrow- by banging it gently with a plastic hammer.
  N13-10286

Bearing shells: Installation position (engine code BGU) > < Pistons and conrods - general over view of components