General information about the ignition system |
t
| The engine control unit has a self-diagnosis capability. |
t
| For trouble-free operation of the electrical components a voltage of at least 11.5 V is necessary |
t
| Certain tests may lead to a fault being detected by the control unit and stored. Thus, the fault memory must be interrogated and erased if necessary after all tests and repairs have been completed → Chapter. |
t
| If after the fault location, repair or testing of components, the engine only starts for a short time and then stalls, this may be because the immobiliser has blocked the engine control unit. In this case, consult the fault memory → Chapter and adjust the control unit if necessary → Chapter. |
|
|
|