| To prevent injuries to persons and/or serious damage to the fuel injection and ignition system, the following must be noted: |
| t
| If the engine is running or switched on, do not touch nor remove the ignition cables. |
| t
| The cables for the injection and starter systems, in addition to the measurement equipment cables, should only be disconnected and connected when the ignition is switched off. |
| t
| Before washing the engine ensure that the ignition is switched off. |
| t
| Always switch off the ignition before connecting or disconnecting the battery, otherwise the engine control unit may be damaged. |
| t
| If the engine must work in starting mode without actually starting (for example during compression testing), it is necessary that: |
| Please note the following if test equipment has to be used during a test drive: |
| t
| Test and measuring instruments must always be secured to rear seat and operated by a second person. |
| If test and measuring instruments are operated from front passenger seat, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
|
|
|
