seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine control unit: Removing and installing > < Reading out and erasing the engine control unit event memory

Leon Mk2

Functions and components adjusting
Functions and components adjusting
Special tools and workshop equipment required
   
t  Vehicle diagnostic, testing and information system -VAS 5051- or vehicle diagnostic and service information system -VAS 5052-
  W00-1236
t  3m. Cable -VAS 5051/5A- or 5m. cable -VAS 5051/6A- or diagnosis cable -VAS 5052/3-
  W00-10194
Operation process
–  Connect the central diagnosis -VAS 5051- or central diagnosis -VAS 5052- with the relevant cable.
–  Select the function „Guided fault finding“ on the vehicle diagnostic, testing and information system -VAS 5051-/5052.
When all control units have been read:
–  Press „Go to“ button.
–  Select „Function/component selection“.
–  „Select drive train.“
–  Select „Engine code“.
–  Select „01 - Systems capable of self-diagnosis“.
–  Select „engine control“.
–  Select „Functions“.
–  Select „Function or component“.
  E90-10001

Engine control unit: Removing and installing > < Reading out and erasing the engine control unit event memory