Leon Mk2
| Oil filter, engine oil cooler - exploded view |
| 1 - | Bracket for ancillary mechanical units |
| q | Removing and installing → Chapter. |
| 2 - | Oil pressure switch -F22- |
| q | Blue insulation |
| q | Removing and installing → Chapter. |
| q | check → Chapter |
| q | 20 Nm |
| 3 - | Oil pressure switch for reduced oil pressure -F378- |
| q | Brown insulation |
| q | Removing and installing → Chapter. |
| q | check → Chapter |
| q | 20 Nm |
| 4 - | Seal |
| q | replace |
| 5 - | O ring |
| q | Not available as replacement part, supplied together with valve unit |
| 6 - | O ring |
| q | Not available as replacement part, supplied together with valve unit |
| 7 - | Valve unit |
| q | With O-rings |
| 8 - | Oil filter |
| q | Remove and install with oil filter tool -3417- |
| 9 - | Bolt |
| q | 15 Nm |
| 10 - | Coupling |
| 11 - | Oil seal |
| q | replace |
| 12 - | Engine oil cooler |
| q | See note → Chapter |
| q | Ensure clearance to adjacent components |
| q | Removing and installing → Chapter. |
| 13 - | Seal |
| q | replace |
| 14 - | Bolt |
| q | Tightening sequence → Fig. |
