Leon Mk2
| Ignition system - exploded view |
| 1 - | Knock sensor 1 -G61- |
| q | On front of cylinder head below intake manifold |
| q | Removing and installing → Chapter. |
| q | Gold plated contacts |
| 2 - | 20 Nm |
| q | The tightening torque influences the function of the knock sensor. |
| 3 - | Ignition coil with output stage -(N70, N127, N291, N292)- |
| q | Removing and installing → Chapter. |
| 4 - | Spark plug, 25 Nm |
| q | If a spark plug is replaced, regrease ignition coil with final output stage → Anchor |
| q | Type and spark gap → Chapter |
| q | Remove and install with the spark plug spanner -3122 B- |
| 5 - | O ring |
| 6 - | Engine speed sender -G28- |
| q | At lower left of front cylinder block, next to coarse oil separator → Fig. |
| q | Removing and installing → Chapter. |
| 7 - | 10 Nm |
| 8 - | Hall sender -G40- |
| q | In front cylinder head cover |
| q | Gold plated contacts |
