SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Spark plug test data >
< Removing and installing knock sensor 1G61
Leon Mk2
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Ignition system, glow plug system / Servicing ignition system
Removing and installing engine speed senderG28
Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Removing:
–
Remove engine cover panel.
–
Release hose clip
-2-
on air pipe.
–
Unplug electrical connector
-arrow-
.
–
Remove the sound insulation
→ Bodywork, exterior installation work; Rep. gr.50
–
Remove charge air hose
-A-
and seal charge air cooler with a clean cloth.
–
Unscrew bolts
-1 and 4-
and remove air hose from throttle valve module -J338- downwards.
–
Unplug electrical connector
-1-
at engine speed sender -G28-.
–
Unscrew securing bolt for engine speed sender -G28-.
Installing:
Installation is carried out in the reverse order; noting the following in the process:
l
Tightening torque
→ Item
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Ignition system, glow plug system / Servicing ignition system
Removing and installing engine speed senderG28
Spark plug test data >
< Removing and installing knock sensor 1G61