Leon Mk2
| Cooling system components, bodywork side - Assembly overview (Radiator with one fan) |
| 1 - | Upper coolant hose |
| q | Leads to cylinder head coupling |
| 2 - | O ring |
| q | Replace in case of damages |
| 3 - | Radiator |
| q | Removing and installing → Chapter |
| q | Renew coolant after replacing. |
| 4 - | Seal |
| q | The bottom seal is not necessarily fitted |
| 5 - | Sealing plug |
| q | Check using the cooling system tester -V.A.G 1274 B- and the adapter for checking cooling systems -V.A.G 1274/9- |
| q | The pressure release valve should open at a pressure of 1.4 - 1.6 bar. |
| 6 - | Electrical connector |
| 7 - | 5 Nm |
| 8 - | Expansion tank |
| q | Check the cooling system for leaks using the cooling system tester -V.A.G 1274 B- and the cooling system tester adaptor -V.A.G 1274/8- |
| 9 - | Radiator mount |
| 10 - | 5 Nm |
| 11 - | Retainer |
| 12 - | Radiator fan -V7- |
| q | Removing and installing → Chapter |
| q | With coolant fan control unit -J293- |
| 13 - | Cowling |
| 14 - | 5 Nm |
| 15 - | 5 Nm |
| 16 - | Electrical connector |
| 17 - | Lower coolant hose |
| q | Leads to thermostat coupling |
| 18 - | Clip |
| 19 - | Coolant temperature sender - radiator outlet -G83- |
| 20 - | O ring |
| q | Renew |
