Leon Mk2
Cooling system components, bodywork side - Assembly overview (Radiator with two fans) |
1 - | Upper coolant hose |
q | Leads to cylinder head coupling |
2 - | O ring |
q | Replace if damaged |
3 - | Radiator |
q | removing and fitting → Chapter |
q | Renew coolant after replacing |
4 - | Seal |
q | The bottom seal is not necessarily fitted |
5 - | Sealing cap |
q | Check using cooling system tester -V.A.G 1274- and adapter for cooling system tester -V.A.G 1274/9-. |
q | The pressure relief valve must open at a pressure of 1.4 … 1.6 bar. |
6 - | Electric connector |
7 - | 5 Nm |
8 - | Expansion tank |
q | Check the cooling system for leaks using the cooling system tester -V.A.G 1274 B- and the cooling system tester adaptor -V.A.G 1274/8- |
9 - | Radiator mount |
10 - | 5 Nm |
11 - | Support |
12 - | 5 Nm |
13 - | Cowling |
14 - | 5 Nm |
15 - | Fan 2 of the radiator -V177- |
q | removing and fitting → Chapter |
16 - | Electric connector |
17 - | Radiator fan -V7- |
q | removing and fitting → Chapter |
q | With coolant fan control unit -J293- |
18 - | Lower coolant hose |
q | Leads to thermostat coupling |
19 - | Retaining clip |
20 - | Coolant temperature sender - radiator outlet -G83- |
21 - | O ring |
q | replace |