seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Coolant thermostat: Removing and installing > < Removal:

Leon Mk2

Installing
Installing
Installation is carried out in the reverse order; noting the following in the process:
  Note
Renew O-ring.
–  Clean or smoothen sealing surface for O-ring.
   
–  Moisten new O-ring -3- with coolant.
–  Fit coolant pump -2-.
l  Fitting position: Housing plug points downwards.
–  Tighten coolant pump bolts -1-.
–  Install toothed belt (adjust valve timing) → Chapter.
–  Install poly V-belt → Chapter.
–  Fill coolant system with coolant → Chapter.
Tightening torques
  A19-0084
ComponentNm
Coolant pump to cylinder block15
Centre section of notched belt guard to cylinder block10 → Remark
Ribbed belt tensioner to ancillaries bracket23
Deflector plate in the auxiliary group bearing23

1)  Apply locking fluid when fitting
   

Coolant thermostat: Removing and installing > < Removal: