SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing radiator >
< Coolant thermostat: Removing and installing
Leon Mk2
Power unit
4 cylinder Injection engine (Autogas)
Engine cooling / Removing and installing parts of cooling system
Removing and installing radiator fanV7 and radiator fan?2V177
Removing and installing radiator fanV7 and radiator fan 2V177
Removing and installing radiator fan -V7- and radiator fan 2 -V177-
Note
The procedure is identical for vehicles where only the radiator fan -V7- is fitted.
Removal:
–
Unscrew air duct at lock carrier
-arrows-
and remove the air ducts.
–
Remove the soundproofing
→ Bodywork, exterior fitting work; Rep. gr.50
.
–
Pull off the air duct hose
-arrow-
underneath at the pre-volume container and remove it.
–
Loosen the bottom coolant hose from the radiator.
–
Disconnect the plug
-1-
and unscrew the bottom fixing screws of the air duct
-arrows-
.
–
Unscrew the top fixing screws of the air conduit guard
-arrows-
and take out the air conduit guard to the top.
–
Disconnect the electrical connection
-1-
, and set the cables aside.
–
Unscrew nuts
-arrows-
and take radiators out.
Installing
Installation is carried out in the reverse order; noting the following in the process:
–
Fit the air conduit guard from above.
Tightening torques:
Component
Nm
Radiator fan to air vent
10
Air vent to radiator
5
Power unit
4 cylinder Injection engine (Autogas)
Engine cooling / Removing and installing parts of cooling system
Removing and installing radiator fanV7 and radiator fan?2V177
Removing and installing radiator >
< Coolant thermostat: Removing and installing