–
| Insert the valve fitting tool -2036- and adjust the bearing to the stud height. |
–
| Screw in the pressure hose -VW 653/3- into the spark plug thread. |
–
| Connect pressure hose to a compressed air system of at least 6 bar of compressed air. |
–
| Remove valve springs with the valve lever -VW 541/1 A- and pressure tool -VW 541/6-. |
Note Tight cotters can be released by tapping lightly on the valve lever. |
–
| Remove the valve stem seals with the valve stem seal extractor -3364-. |
|
|
|