SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Lambda probeG39: Removing and installing >
< Exhaust manifold: Removing and installing
Leon Mk2
Power unit
4 cylinder Injection engine (Autogas)
Exhaust system
Components of the exhaust system: Removing and installing
Exhaust system: install free of tension
Exhaust system: install free of tension
Exhaust system: install free of tension
l
The exhaust system must be installed cold.
–
Loosen the bolts of the front clamp
→ Item
.
–
Move the exhaust system forwards until the tension on the support tie on the secondary silencer, measurement
-dimension a-
, is 5 ... 11 mm.
–
Install the clamp so that the bolt end does not project over the clamp lower edge
-arrow-
.
l
Bolt connection faces to right.
–
Tighten the bolts on the clamp evenly to 25 Nm.
Power unit
4 cylinder Injection engine (Autogas)
Exhaust system
Components of the exhaust system: Removing and installing
Exhaust system: install free of tension
Lambda probeG39: Removing and installing >
< Exhaust manifold: Removing and installing