seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil seal for the camshaft: replacement|Fitting > < Oil seal for the camshaft: replacement

Leon Mk2

Removing
Removing
   
–  Disassembling the engine cover -arrows-.
–  Remove the hooks from the upper protection cover of the toothed belt and remove it.
  E10-0123
–  Rotate the crankshaft until the camshaft cogwheel is at TDC 1. The mark on the camshaft wheel should coincide with the arrow on the toothed belt protection.
–  Turn crankshaft back slightly.
  A13-0077
–  Loosen the tensioning pulley -arrow-.
–  Remove notched belt.
–  Remove the cogwheel from the camshaft. To loosen the bolt, immobilise the cogwheel using the retention tool -T20018A-.
  E13-0218
–  Insert tool -T20143- and remove the oil seal.
  E15-0259

Oil seal for the camshaft: replacement|Fitting > < Oil seal for the camshaft: replacement