Leon Mk2
| Part II |
| 1 - | 40 Nm |
| 2 - | Belt pulley/vibration damper |
| q | Removing and fitting → Chapter |
| 3 - | 25 Nm |
| 4 - | Tensioning device for Poly-V ribbed belt |
| q | To release the tension of the Poly-V belt use a flat spanner → Anchor |
| 5 - | Alternator |
| q | Removing and fitting: → Electrical system; Rep. Gr.27 |
| q | To facilitate fitting the alternator, the screw caps for the attachment bolts on the alternator should be moved back a little |
| 6 - | Additional sub-frame bracket |
| q | Removing and fitting → Chapter |
| 7 - | 45 Nm |
| 8 - | 23 Nm |
| 9 - | Air conditioning/climate control air compressor |
| q | Before fitting, ensure that the centering caps are in position → Item of the centering devices for the air conditioning/climate control |
| 10 - | Centering bushes |
| 11 - | Poly-V belt |
| q | Path of the Poly-V ribbed belt → Chapter |
| q | Removing and fitting → Chapter |
| q | Before removing this, mark the rotation direction |
| 12 - | 23 Nm |
