seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Pulley/vibration damper: removing and fitting > < Removing

Leon Mk2

Fitting
Fitting
  Note!
t  Before fitting the Poly-V belt, ensure that all of the groups are correctly fitted (alternator, air conditioning/climate control compressor).
t  When fitting the Poly-V belt, ensure that the belt is fitted in the correct direction of rotation and that it is correctly seated on the pulleys.
–  Fit the Polly-V belt onto the pulleys of the crankshaft and the alternator.
–  Fit the Poly-V belt lastly on the air conditioning/climate control air compressor.
   
–  Relax the tensioning element and remove the -T20167- tool from its location -arrow-.
–  Check correct fitting of the Poly-V belt.
Continue fitting following the reverse order of the removal process.
–  Start engine and check how belt is running.
  E13-0220

Pulley/vibration damper: removing and fitting > < Removing