| Exhaust system: removing and fitting |
Note! | t
| Always replace gaskets and self-locking nuts. |
| t
| After working on the exhaust system ensure that the system is not under stress, and that it has sufficient clearance from the bodywork. If necessary, loosen double and single clamps and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the supports are evenly loaded. |
| t
| Note the assembly positions and dimensions of the exhaust system. |
| t
| The articulated section in the front exhaust pipe should not be bent more than 10° or it could be damaged. |
| t
| If, after assembling the exhaust system, harsh noises can be heard, adjust the engine brackets. |
|
|
|
