Leon Mk2
| Vehicles with engine identification letters AZL |
| 1 - | Fuel pressure regulator |
| q | Verification → Chapter |
| 2 - | Vacuum tube |
| q | To the upper part of the inlet manifold. |
| 3 - | Cable guide |
| 4 - | Intake manifold |
| q | Lower part |
| q | For removal it is necessary to remove the upper part of the inlet manifold → Chapter |
| 5 - | 10 Nm |
| 6 - | O-Ring |
| q | Replacement |
| q | Apply clean engine oil before fitting |
| 7 - | To the flexible air inlet tube |
| 8 - | Injectors -N30-, -N31-, -N32- and -N33- |
| q | Verification → Chapter |
| q | Air tight seal of the injectors and the quantity injected: verification → Chapter |
| 9 - | Retaining clip |
| q | Ensure tight fit |
| 10 - | Fuel rail |
| 11 - | Return hose |
| 12 - | Supply hose |
| 13 - | Air conduction tube |
| q | To the injectors |
| 14 - | O-Ring |
| q | Replacement |
| q | Apply clean engine oil before fitting |
