Crankshaft sealing flange, flywheel side: removing and fitting |
Sheet plate seal specifications: |
t
| Different centring pins are not used |
t
| Sealing profile faces the gearbox |
t
| The screws are shorter than with an aluminium sealing ring |
Aluminium seal specifications: |
t
| Centring pins are required in the cylinder block |
t
| Sealing profile faces the engine |
t
| The screws are shorter than with a sheet plate seal |
Note t
| When a sheet plate flange should be mounted instead of an aluminium sealing ring, the centring pins must be removed and shorter screws must be used → ETKA (electronic parts catalogue). |
t
| When an aluminium sealing ring should be mounted instead of a sheet plate seal, the centring pins must be inserted and longer screws must be used → ETKA (electronic parts catalogue). |
Removing and fitting the aluminium seal → Chapter |
Removing and fitting the sheet plate seal → Chapter |
|
|
|