Leon Mk2
Overview: fuel delivery unit and fuel gauge sender |
1 - | Fuel delivery unit |
q | removing and installing → Chapter |
q | Checking fuel pump working → Chapter |
q | Fuel pump: operation and supply voltage verification → Chapter |
q | Fuel pump control unit -J538- : check supply voltage → Chapter |
q | Fuel pump control unit -J538- : check excitation → Chapter |
q | Checking fuel pump delivery → Chapter |
q | Check the fuel retention pressure → Chapter |
q | Fuel pump:adapting after renewal of fuel delivery unit → Vehicle diagnostic, testing and information system VAS 5051. |
2 - | Seal |
q | replace |
q | Place dry ring gasket in the opening of the fuel tank. |
3 - | Fuel supply line |
q | black |
q | To fuel filter |
q | Do not kink. |
q | Goes to connection marked with „V“ on flange |
q | To extract from sealing flange, press release tab on connection |
4 - | Fuel return line |
q | blue |
q | Do not kink. |
q | Goes to connection marked with „R“ on flange |
q | To extract from sealing flange, press release tab on connection |
5 - | Electric connector |
q | For fuel pump (pre-supply pump) -G6- and fuel gauge sender -G- |
6 - | Locking nut, 110 Nm |
q | Remove and install using wrench -T10202-. |
q | Check assembly position with respect to the fuel delivery unit and the fuel tank → Anchor. |
7 - | Fuel gauge senders -G- |
q | check → Chapter |
q | removing and installing → Chapter |