seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Electronic regulation of engine output, electronic accelerator > < Fuel filter and accessory parts - general component overview

Leon Mk2

Removing and installing fuel filter
Removing and installing fuel filter
  Note
t  Note safety precautions before beginning work → Chapter.
t  Observe rules for cleanliness → Chapter.
t  Removing → Anchor
t  Fitting → Anchor
t  Installation position → Fig.
Special tools and workshop equipment required
t  Container
Removing
–  Place container under fuel filter.
  WARNING
Fuel system is under pressure! Before opening the system place a cloth around the connection. Then release pressure by carefully pulling fuel hose from connection. Wear eye protection and gloves to avoid injuries and skin contact.
   
–  Pull fuel lines -1-, -2- and -3- off. To do this press release tab.
–  Remove bolt -4-.
–  Detach the fuel filter.
Installing
Continue the installation in the reverse order of removal sequence, observing the following:
  A20-1082
installation position
Pin -2- on filter housing must engage in notch of guide -1- in filter bracket.
Flow direction is marked on filter housing with arrows.
  A20-1133

Electronic regulation of engine output, electronic accelerator > < Fuel filter and accessory parts - general component overview