Leon Mk2
| Throttle valve control unit, exhaust gas recirculation valve in the intake manifold- Components overview |
| 1 - | Solenoid valve 1 for active carbon filter unit (pulsed) -N80- |
| 2 - | Bracket for Solenoid valve 1 for active carbon filter unit (pulsed) -N80- |
| 3 - | Coupling hose |
| q | Between the Solenoid valve 1 for active carbon filter unit (pulsed) -N80- and the active carbon filter |
| 4 - | Flange bolt, 10 Nm |
| q | Only engine code BLR and BVY |
| 5 - | Exhaust gas recirculation joint hose |
| q | Only engine code BLR and BVY |
| 6 - | Flange bolt, 10 Nm |
| q | Only engine code BLR and BVY |
| 7 - | Seal |
| q | Only engine code BLR and BVY |
| 8 - | Exhaust gas recirculation valve -N18- with potentiometer for exhaust gas recirculation -G212- |
| q | Only engine code BLR and BVY |
| q | adapt to engine control unit after renewing → Vehicle diagnostic, testing and information system VAS 5051 |
| q | removing and fitting → Chapter |
| 9 - | Coolant hoses |
| q | Only engine code BLR and BVY |
| 10 - | Flange bolt, 10 Nm |
| q | Only engine code BLR and BVY |
| 11 - | 40 Nm |
| q | Only engine code BLR and BVY |
| 12 - | Flange bolt, 25 Nm |
| q | Only engine code BLR and BVY |
| 13 - | Exhaust gas recirculation joint hose |
| q | Only engine code BLR and BVY |
| 14 - | Flange bolt, 5 Nm |
| q | Only engine code BLR and BVY |
| 15 - | Fuel rail (common channel) |
| q | → Chapter |
| 16 - | Purge tube |
| 17 - | Intake manifold change-over: |
| Removing and installing intake manifold → Chapter. |
| 18 - | Intake manifold pressure/air pressure sender -F96 /G71- with air intake temperature sender -G42- |
| q | → Fig. |
| 19 - | Throttle valve control mechanism -J338- |
| q | adapt to engine control unit after renewing → Chapter |
| 20 - | Flange bolt, 10 Nm |
| 21 - | 10 Nm |
| 22 - | Rubber mount |
| 23 - | Cap |
| 24 - | Variable intake manifold change-over valve -N156- |
| q | → Fig. |
| 25 - | Coupling hose |
| q | Between the vacuum tank and the upper section of the air filter |
| 26 - | Flange bolt, 10 Nm |
| q | Only engine code BLR and BVY |
| 27 - | Clamp |
| 28 - | Connector (4 units) |
