Note t
| Cylinder heads with cracks between the valve seats can be still used without a reduction in useful life, as long as the cracks are no more than 0.5 mm in width. |
t
| After fitting the camshaft, the engine should not be started for about The hydraulic followers must be allowed to sit in to position (otherwise, the valves will hit the pistons). |
t
| After carrying out work on the valve control, rotate the engine gently 2 times to ensure that, before starting the engine, no valve is down. |
t
| Renew gaskets and seals. |
t
| Removing and fitting the tandem pump → Chapter. |
|
|
|