Leon Mk2
| Fuel supply unit and fuel level indicator sender - Component overview (front wheel drive vehicles) |
| 1 - | Fuel delivery unit |
| q | removing and fitting → Chapter |
| q | Checking fuel pump (electrical test) → Chapter |
| 2 - | Seal ring |
| q | Replace. |
| q | Place dry ring gasket in the opening of the fuel tank. |
| 3 - | Fuel supply line |
| q | Black |
| q | To fuel filter |
| q | Do not kink |
| q | Connected to connection marked “V” on sealing flange |
| q | To extract from sealing flange, press release tab on connection |
| q | Install on fuel tank |
| 4 - | Fuel return line |
| q | Blue colour |
| q | To fuel radiator |
| q | Do not kink |
| q | Connected to connection marked “R” on sealing flange |
| q | To extract from sealing flange, press release tab on connection |
| q | Install on fuel tank |
| 5 - | Electrical connector |
| q | For fuel pump (pre-supply pump) -G6- and fuel gauge sender -G- |
| 6 - | Seal ring 110 Nm |
| q | Remove and install with wrench -T10202- . |
| 7 - | Fuel gauge senders -G- |
| q | Checking resistance values → Chapter |
| q | removing and fitting → Chapter |
