seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Select operating mode: > < Test conditions

Leon Mk2

Work sequence
Work sequence
–  Remove the front cover from the fusebox.
   
–  Connect the -VAS 5051- with diagnosis lead -VAS 5051/1 or VAS 5051/3-, as follows:
–  Connect the diagnosis lead at the diagnosis terminal.
–  According the function desired, switch on the ignition or Start the engine and run it at idling revs → Chapter“Selectable functions”
  Note!
t  In functions “04 - Basic settings” and “08 - Read measured value block” the different display fields are shown from top to bottom.
t  If the display does not show the messages in work sequence: → Vehicle diagnosis, testing and information system VAS 5051
  E01-0011
Reading on display:
  E01-0012

Select operating mode: > < Test conditions