Leon Mk2
Repair the active carbon tank installation components |
1 - | Ring support |
2 - | Support |
q | In the right forward body work |
3 - | Electromagnetic valve 1 -N80- |
q | The valve is closed with the ignition shut off |
q | The Motronic -J220- control unit controls the valve when the motor is hot (contact) |
q | Check: → Rep. Gr.01 |
4 - | Connector |
5 - | Ventilation conduit |
q | The gravity and spillage valve in the fuel tank → Item |
6 - | Control unit for the butterfly -J338- |
7 - | Active carbon tank |
q | Location: in the front right wheel arch |
q | “ENGINE” connection, inlet to the electromagnetic valve 1 → Item |
q | “TANK” connection, inlet with the depression lock valve |
q | To disassemble, deblock the safety tab -arrow- and slip the recipient out and upward |