| –
| Fit the puller -T20081B- with guide sleeve -T20081B/5- and press sleeve onto camshaft and fully secure camshaft sprocket securing bolts into camshaft. |
| –
| Fit camshaft sprockets. |
Note! | Observe position of camshaft sprockets to camshaft keyways. |
| –
| Fix correseponding camshaft sprocket with camshaft locking device -T10016- and tighten new securing bolts to 20 Nm + 1/4 turn (90°). |
| Installing toothed belt and adjusting valve timing → Chapter. |
|
|
|
