seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Test sequence > < Engine operating conditions: checking
Check conditions
Check conditions
l  All fuses must be OK.
l  Battery voltage at least 11.5 V
l  All electric consumers, e.g.: lights and rear window heater must be switched off.
l  If the vehicle is equipped with air conditioning, this must be switched off.
l  Throttle cable adjustment must be OK, checking: → Chapter
l  Coolant temperature must be at least 80 °C ⇒ display group 1, display zone 2.
   

Test sequence > < Engine operating conditions: checking