Leon Mk2
Ignition distributor: dismantling and assembling |
1 - | Ignition distributor axis |
q | With diaphragm for Hall sender |
q | Dismantle pin → Item and remove it |
2 - | O-ring |
q | Renew if damaged |
3 - | 3 Nm |
4 - | Plastic washer |
5 - | Washer(s) |
6 - | Hall sender -G40- |
q | Checking → Chapter |
7 - | Ignition distributor box |
8 - | Pin |
9 - | Coupling |
q | Mark position of the drive pivot in relation to the shaft → Item before removing it |