| –
| Test injector resistances between contacts. Target value: 12...17 Ω. |
Note! | The resistance value is valid for approx. 20 °C. In the event of higher temperatures the resistance value rises. |
| If the target value is not reached: |
| –
| Replace the faulty injector → Item. |
| The injectors are fitted in the reverse order, bearing in mind the following: |
| t
| The O-rings of all the injectors must be replaced and lightly oiled with clean engine oil. |
| t
| Insert the injectors vertically and in the correct position in the fuel distributor and immobilise them with holding clips. |
| t
| Fit the fuel distributor with the injectors correctly fitted in the cylinder head and insert in uniformly. |
|
|
|
