The selection lever locking magnet -N110--1- is located on the gearbox operation mechanism.
The magnet is a fixed component of the gear selection mechanism, and can therefore not be replaced separately. It can only be removed or fitted together with the gear selection mechanism → Chapter.
DSG automatic gear mecatronic system -J743-
the mecatronic unit for the DSG automatic gearbox -J743- is bolted onto the front part of the gearbox and is covered by the gear oil sump.
The control unit is integrated into the mecatronic unit for the DSG automatic gearbox -J743-.
t
Verified by self-diagnosis
Remove and fit the DSG automatic gear mecatronic system -J743- → Chapter
Tiptronic switch -F189-
The Tiptronic switch -F189- is an integral component of the printed circuit board -B- of the gear selection mechanism.
t
Verified by self-diagnosis
The Tiptronic switch -F189- is a fixed component of the gear selection mechanism, and can therefore not be replaced separately. It can only be removed or fitted together with the gear selection mechanism → Chapter.
Gear selector position indicator -Y6-
Fitting location: integrated on the instrument panel
Note
The selector lever position indicator can only be replaced together with the dash panel.
If the selector lever position indicator is flashing or lit up, the gearbox control unit safety functions should be observed → Chapter.