seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing roof aerial > < Roof aerial for telephone operation
Roof aerial for navigation system and telephone
Roof aerial for navigation system and telephone
  Note!
The roof aerial is not designed for use with the radio. The radio aerial is integrated in the rear right side window.
   
1 - Aerial rod
2 - Aerial base
q   Antenna amplifier for the navigation system is installed in the aerial base.
q   No amplifier is fitted for telephone operation.
q   Removing and installing → Chapter.
3 - Aerial cable
q   For the navigation system.
q   From roof aerial to front of centre console.
4 - Aerial cable
q   For telephone operation.
q   Of the roof aerial under the driver seat.
5 - Seal
6 - Hexagon nut M14 with serrated washer
q   The hexagon nut is connected to the serrated washer by a plastic ring.
q   Apply contact grease to the inside of the roof in area of serrated washer.
7 - Rubber ring
q   The rubber ring is mounted on the fixing bolt at the aerial base prior to roof installation.
8 - Retaining ring
9 - Hexagon nut M6

   

Removing and installing roof aerial > < Roof aerial for telephone operation