seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Electronic anti-theft system > < Contact assignment of 11-pin connector for RGB connection

Leon Mk2

Multi-pin connectors I, II, III contact assignment on rear of radio/navigation system
Multi-pin connectors I, II, III contact assignment on rear of radio/navigation system
Multi-pin connector I, -T20- consists of 3 parts that are marked with different colours:
   
Multi-pin connector I, part 1, yellow
1 - Line Out, rear left, positive
2 - Line Out, rear right, positive
3 - Line Out, negative
4 - Line out, front left, positive
5 - Line Out, front right, positive
6 - Switched positive for sound amplifier
  N91-0139
Multi-pin connector I, part 2, green
7 - Telephone input signal, telephone positive
8 - Time display, CLOCK (internal check protocol for data flow monitoring)
9 - Time display, DATA (exchange of data for dash panel insert with a clock)
10 - Second display, ENA (monitors data flow and feedback of successful data transfer)
11 - Remote control
12 - Telephone input signal, telephone negative
  N91-0139
Multi-pin connector I, part 3, blue
13 - CD changer, DATA IN (data to radio)
14 - CD changer, DATA OUT (data from radio)
15 - CD changer, CLOCK (internal check protocol for data flow monitoring)
16 - CD changer, voltage supply, positive, terminal 30
17 - CD changer, control signal
18 - CD changer, left and right channels, negative
19 - CD changer, left channel, CD/L
20 - CD changer, right channel, CD/R
  N91-0139
Multi-pin connector II, -T8a-, 8-pin, brown
1 - Loudspeaker, rear right, positive
2 - Loudspeaker, rear right, negative
3 - Loudspeaker, front right, positive
4 - Loudspeaker, front right, negative
5 - Loudspeaker, front left, positive
6 - Loudspeaker, front left, negative
7 - Loudspeaker, rear left, positive
8 - Loudspeaker, rear left, negative
  N91-0139
Multi-pin connector III, -T8-, 8-pin, black
1 - Gala (speed dependent volume adaptation)
2 - Telephone operation muting (contact is switched to negative)
3 - Self-diagnosis/K cable
4 - Connection for ignition-key-controlled switching on and off (S contact)
5 - Anti-theft system control signal, SAFE
6 - Radio illumination, terminal 58b
7 - Battery supply voltage, positive, terminal 30
8 - Battery supply voltage, negative, terminal 31
  N91-0139

Electronic anti-theft system > < Contact assignment of 11-pin connector for RGB connection