| Wheel circumference adaptation (matching) |
Note! | Wheel circumference adaptation is only necessary when the radio/navigation system unit is exchanged. |
| –
| Select the diagnostic function “10 - Adaptation”. |
| –
| Use the numeric keypad on the test unit display to enter channel number “01”. |
| –
| Confirm your entry by pressing the Q key. |
| The selected channel number and the currently stored tyre circumference in mm are displayed. |
| –
| Enter new tyre circumference, when doing this place a zero before the 4-digit number (e.g. 01915). |
| –
| Confirm your entry by pressing the Q key. |
| –
| Confirm the save prompt by pressing the Q key. |
| The changed value has been saved. |
| –
| Terminate the diagnostic functions with “06 - End output”. |
|
|
|
